3M 94 Primer 30ml

3M 94 Primer 30ml

Out of Stock - Back Soon


3M™ Primer 94 (30ml) 


****No International Shipping. Ships to Southern and Northern Ireland only. 


3M™ Primer 94 can be used to promote adhesion of Car Wrapping Vinyls to surfaces such as edges and deep recesses where usually you might see lifting of the Vinyls. Our 30ml sized bottles are cabable of covering about 10 meters of edges and recesses at a 2cm width, enough for an average sized car.

Surface Preparation: The bonding surface must be relatively clean and dry. Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture. A clean lint-free cloth should be used.

Application: Shake 3M primer 94 well before using. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface. Allow 3M primer 94 to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature. Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 applications of 3M primer 94 for uniform coverage and good adhesion. Allow first application of primer to dry before applying the second coat. 3M primer 94 may be applied with brush, clean cloth, swab or sponge. It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment.

Clean up: 3M primer 94 can be removed with isopropyl alcohol. 

Note: Carefully read and follow manufacturer’s precautions and directions for use when handling cleaning solvents.